| Customization: | Available |
|---|---|
| After-sales Service: | Within One Year,Replace by New One |
| Warranty: | 3 Years |
|
Still deciding? Get samples of US$ 22/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Application
The meter is designed to measure single phase two wire AC active energy like residential , utility and industrial application. It is a long life meter with the advantage of high stability , high over load capability , low power loss and small volume .Technical parameters
| Current | Phase current |
| Voltage | L-N |
| Frequency | 45 to 65Hz |
| Power | Active power, Reactive power, Apparent power |
| Power factor | Power factor |
| Data update rate | 1 second. Optional 100 ms | |
| Input-Voltage | Rate voltage (Un) |
230 Vac |
| Direct connection | Measured range : 85 to 270 Vac | |
| Frequency range | 45 to 65 Hz | |
| Overload capacity | 2*Un for 1 second | |
| Input-Current | Measured range | 0.005 to 100 A, basic current (Ib) is 5A |
| Overload capacity | 30*Imax for 0.01 second | |
| Pulse output | Interface type | Open collector optocoupler |
| Pulse constant | 1000 / 100 / 10 / 1 imp/kWh(kvarh) (Configurable) | |
| Pulse width | 60/100/200 milliseconds (Configurable), default is 100milliseconds | |
| Pulse output type | Import/export/total active energy, Import/export/total reactive energy (Configurable) |
|
| Class | Class A, according IEC 62053-31 | |
| Input voltage | 5 ~ 27 Vdc | |
| Pulse indicator light on the panel | Pulse constant is 1000imp/kWh | |
| Real-time clock accuracy | 0.5 s/d | |
| Mechanical Characteristics | |
| IP Degree of Protection (IEC 60529) | Designed to IP51 front display, IP30 meter body |
| Dimensions (W X H X D) | 36 x 100 x 66 mm |
| Mounting Position | DIN Rail mounting |
| Material of meter case | UL 94 V-0 |
| Environmental Characteristics | |
| Operating Temperature | -25 to +55ºC |
| Storage Temperature | -40 to +80ºC |
| Humidity | < 90%, non-condensing |
| Pollution Degree | 2 |
| Altitude | Up to 2000m |
| Vibration | 10 Hz to 150Hz, IEC 60068-2-6 |
| Safety | |
| Measurement Category | CAT III, according IEC 61010-1 |
| Overvoltage Category | CAT III, according IEC 61010-1 |
| Insulation | AC Voltage Test: 4kV for 1 minute |
| Impulse Voltage Test: 6kV - 1.2/50µS waveform | |
| Protective Class | II, according IEC61010-1 |
| Communications | |
| Interfaces standard and protocols | 2-wire RS485, Modbus RTU Optional: MBus |
| Buad rate | 1200 to 38400 bps, default is 9600 bps |
| Parity bit | None, Even, Odd, default is None |
| Stop bit | 1 or 2, default is 1 |
| Response time | <100ms |
| Transmission mode | half-duplex |
| Transmission distance | Up to 1000m |
| Max. Bus loading | 64 pcs |
Company Profile
Zhejiang Xinghao Technology Co., Ltd., founded in 2009, is a power meter manufacturer and energy management solutions provider in China. The company specializes in research and development, production and sales of a full spectrum of energy management products, including: Power meters (regular and prepaid); Power monitoring systems; Intelligent transformers, and Internet of Things communication equipment, among others.
Certificate
FAQ
Q1: If I'm interested in your LED three phase full power meter, when can I receive your quotes and detailed information after sending the initial inquiry?
){kind=link}